Industrial Electric Clutches

Schlingfederkupplungen

Reell's standard electric wrap spring clutch design gives you the ability to drive a high amount of torque in a small package. Available in a broad range of sizes and load capacities for motion control applications up to 75 lb-in (8.5 N-m) total load, our electric clutch line is ideally suited for intermittent motion applications requiring consistent timing performance over life. Long life (LL) electric clutches are designed for applications with high input revolutions, extending the clutch bearing life by 2-10x depending on the load and duty cycle requirements.

 

  • Reell EC15 Clutch

    The Model EC15 transfers up to 1.7 N-m (15 lb-in) of total load with consistently repeatable performance for one million actuations.

  • Reell EC20 CCBLL

    The model EC20 Clutch Brake Long-Life (EC20CBLL) design provides stopping and holding torque in addition to clutching. It provides 2.26 N-m (20 lb-in) of total load over a life of 1 million actuations

     

     

  • Reell EC25LL Clutch

    The model EC25 Long-Life (EC25LL) design is optimized for applications which have higher hour and/or input revolution requirements up to 80 million bearing revolutions.

  • Reell EC30LL Clutch

    The model EC30 Long-Life is optimized for applications which have hour and/or input revolution requirements up to 80 million bearing revolutions. It provides 3.39 N-m (30 lb-in) of total load over a life of 1 million actuations.

  • Reell EC30XP

    The model EC30XP high performance clutch has a slightly larger bore allowing the use of a stiffer shaft for higher load applications. It provides 3.39 N-m (30 lb-in) of total load over a life of 1 million actuations.

  • Reell EC75LL Clutch

    The model EC75 Long-Life is optimized for applications which have hour and/or input revolution requirements up to 80 million bearing revolutions. It is rated for one million actuations at 8.5 N-m (75 lb-in) of total load.

  • Reell Slip Devices

    Reell in-line slip devices increase the life of clutch components by providing a constant inline torque which reduce the engagement shock due to inertia.

Need more information about Reell’s Constant Torque Friction Hinges?

As a top constant torque friction hinge manufacturer, Reell strives to provide exceptional products, including high-precision torque friction hinges and services to its customers. Contact Reell engineers directly if you need additional information about performance, fit and function.

Options

Maximum Load - English 1.7 N-m (15 lb-in)
Direction CW, CCW
Voltage 12 VDC, 24 VDC
Connector Molded connector, 8" leaded coil
Bore 6mm,  1/4"
Shaft Cross Pin

Options

Maximum Load 2.26 N-m (20 lb-in)
Direction CW, CCW
Voltage 24 VDC Pick/12 VDC Hold
Connector Molded connector
Bore 8mm
Shaft Cross Pin

Options

Maximum Load 2.83 N-m (25 lb-in)
Direction CW, CCW
Voltage 12 VDC, 24 VDC
Connector Molded connector, 8" leaded coil
Bore 6mm,  1/4"
Shaft Cross Pin

Options

Maximum Load 3.39 N-m (30 lb-in)
Direction CW, CCW
Voltage 12 VDC, 24 VDC
Connector Molded connector, 8" leaded coil
Bore 6mm, 1/4", 8mm
Shaft Cross Pin

Options

Maximum Load 3,39 N-m (30 lb-in)
Direction CW, CCW
Voltage 12 VDC, 24 VDC
Connector Molded connector
Bore 6mm,  1/4", 8mm
Shaft Cross Pin

Options

Maximum Load 8.5 N-m (75 lb-in)
Direction CW, CCW
Voltage 12 VDC, 24 VDC
Connector 3" lead with connector
Bore 3/8", 5/8", 1/2", 10mm, 12mm, 15mm
Shaft Cross Pin

SA

Torque 0.2, 0.4, 0.8, 0.95 N-m
Direction CW, CCW
Bore 6mm,  1/4", 8mm
Shaft Cross Pin

SB

Torque 0.1, 0.2, 0.4, 0.7 N-m
Direction CW, CCW
Bore 6mm,  1/4", 8mm
Shaft Cross Pin

SC

Torque 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 N-m
Direction CW, CCW
Bore 6mm,  8mm
Shaft Cross Pin, D-Shaft

SC-HT

Torque 4.0, 5.0, 6.0, 7.5 N-m
Direction CW, CCW
Bore 8mm
Shaft D-Shaft

Clutch Lead Set

Optional lead set with mating AMP 104257 connector and 24GA lead wires.  Length 380mm (15 inch).
Available when purchasing electromechanical clutches.